Well Control Equipment

Well Control Equipment.

ACC-Corporate is happy to discuss with you our range of control equipment for the Well.

We have a range of various psi capacities from 3,000 psi to 15,000 psi.

Every series hydraulic B O P stack consist of Annular BOP, Single Ram BOP, Double Ram BOP and Drilling Spool that can be widely used in onshore and offshore drilling rig operations

The stacks are built with good structure and superior sealing function and in accordance with API spec 16A standard.

We also have a range of U-shaped RAM BOP, S-shaped RAM BOP, Annular BOP.

ACC-Corpoate's Ram BOP's are designed and manufactured according to API Spec 16A standard and GB/T20174 Drilling and production equipment-Drill-through equipment, and is equipped with rams of various sizes.

With the best quality front ram rubber, top ram rubber and flange sealing stacks, U-shaped Ram B O P can work during the extreme working conditions including high or low pressure temperature and extreme chemical environment.

Structure Features. • Pressure-bearing components are forged, so it has better strength and impact toughness.

• Floating-sealing is applied to the cylinder cover and the open/close of the cover is realised by hydraulic power, so it is quick and convenient for changing Rams.

• Auxiliary oil cylinder affords a smaller volume with same function.

• Ram rubber has massive storage volume and it adopts self-contained sealing.

• Standard configuration includes a manual locking device, which ensures the ram is closed tightly in case there is a hydraulic pressure loss.

• Both the manual and hydraulic locking device and the auxiliary oil cylinder can be installed flexibly into different positions according to customers’ requirements and the installation positions can be changed easily.

The design and manufacture of this ACC-Corporate equipment is according to AP spec 16A standard.

They can be equipped with rams of various sizes.

Structure Features.

*Body and side door are made of alloy steel.

*Use seal rings assembly to improve sealing of side door.

*Use floating type ram. Front ram rubber is separated from top ram rubber, making it more reliable in sealing and easier to change.

*Use buried oil way inside body. Loading hinge is separated from hydraulic hinge.

*Compact hinge structure makes it easy to assemble and disassemble.

*Use arc-shaped body chamber with four round corners as transition section to reduce stress peak valve whenever bearing the pressure.

*Ram cavity can be fitted with ram assembly of same type BOP made abroad.

*Flange grooves are stainless steel lined.

The design and manufacture of the ACC-Corporate Well Control Equipment is according to API Spec 16A Standard.

Features.

* The packing element is spherical or tapered with massive storage volume, low operating pressure and excellant sealing function.

* The Bonnet is hemisphercial-shaped so there is no stress concentration on the bonnet whenever bearing the pressure.

*The Bonnet and Body are connected by a wedge block so that pressure is evenly distributed.

* There is an observation hole to inspect the life span of the packing element.

* The Piston is set in a low position to have a shorter moving distance.

Technical Parameters of the Annualr B O P can be supplied upon resquest.

Contact Us.

Please contact us at anytime to discuss your requirements on Well Control Equipment.

Please click here to contact us for more information about Well Control Equipment range...

Thank you.